Gear Oil – Techol Lubricants

Request For MSDS

HYDRO-SYS 150/220/320 (API-AW)

CHARACTERISTICS		VALUE
		100	150	220	320
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	210	210	210	210
3	Kinematic Viscosity, cst @ 100’C	92-108	142-158	220-230	305-335
4	Viscosity Index, min.	90	90	90	90
5	Pour Point, ‘C, max.	-3	-3	0	0
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5	1.5

HYDRO-SYS 68(API-AW)

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

HYDRO-SYS 46(API-AW)

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

HYDRO-SYS 32(API-AW)

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

AUTO TRANSMISSION FLUID(GM TYPE A)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Red
2	Flash Point, COC, ‘C, min.	190
3	Kinematic Viscosity, cst @ 100’C	6-8
4	Viscosity Index, min.	150
5	Pour Point, ‘C, max.	-38

GEAR OIL EP 150/220/320(API-GL4)

CHARACTERISTICS		VALUE
		150	220	320
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	230	240	242
3	Kinematic Viscosity, cst @ 100’C	135-165	198-242	288-352
4	Viscosity Index, min.	90	90	90

GEAR OIL EP-X 80W90/85W140(API-GL5)

CHARACTERISTICS		VALUE
		80W90	85W140
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	200	200
3	Kinematic Viscosity, cst @ 100’C	12-15	25-27
4	Viscosity Index, min.	95	95
5	Pour Point, ‘C, max.	-18	-18

GEAR OIL EP 90/140( API-GL4)

CHARACTERISTICS		VALUE
		90	140
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	200	200
3	Kinematic Viscosity, cst @ 100’C	18-19	30-32
4	Viscosity Index, min.	90	90
5	Pour Point, ‘C, max.	-10	-7

ZOOM SYNTH 4T PLUS 10W40 (API-SM)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	12-15
4	Viscosity Index, min.	150
5	Pour Point, ‘C, max.	-40
6	TBN, mg. KOM/gm	8-12

SPEED 4T PLUS 20W40 (API-SJ)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	200
3	Kinematic Viscosity, cst @ 100’C	12-15
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	7-10

ZOOM-X 4T PLUS 20W50 (API-SL)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	15-18
4	Viscosity Index, min.	145
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	8-11

ZOOM-X 4T PLUS 10W30 (API-SL)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	10-14
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	8-11

ZOOM-X 4T PLUS 20W40 (API-SL)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	200
3	Kinematic Viscosity, cst @ 100’C	12.5-15.5
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	8-11

SPEED 2T(API-TC JASO FC)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	95
3	Kinematic Viscosity, cst @ 100’C	50-65
4	Viscosity Index, min.	110
5	TBN, mg. KOM/gm	1-1.15

G-TECH 20W50(API-SF/CD)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	17-19
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	8-11

AUTO LIFE 15W40(API-CF4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	12-14
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	10-12

KRISHI PSO 20W40 MULTIGRADE(API-CC)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	12.5-15.5
4	Viscosity Index, min.	100
5	Pour Point, ‘C, max.	-8
5	TBN, mg. KOM/gm	4-6

TRANS TRACTO (UTTO) (API-GL4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	218
3	Kinematic Viscosity, cst @ 100’C	11.5
4	Viscosity Index, min.	115
5	Pour Point, ‘C, max.	-27

PRIME TRACTO 15W40(API-CF4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	12-14
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	10-12

STAR TRACTO 20W40(API-CF4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	14-16
4	Viscosity Index, min.	110
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	7-11

SYNTHO-TECH 10W40 (API-SM/CF) SEMI-SYNTH

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	10-15
4	Viscosity Index, min.	145
5	Pour Point, ‘C, max.	-20
6	TBN, mg. KOM/gm	11-13

SYNTHO-TECH 5W30 (API-SM/CF) SEMI-SYNTH

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	10-15
4	Viscosity Index, min.	170
5	Pour Point, ‘C, max.	-40
6	TBN, mg. KOM/gm	11-13

PREMIUM 20W50 (API-SG/CD)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	230
3	Kinematic Viscosity, cst @ 100’C	17-19
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	8-11

PREMIUM TURBO CRUIZE 15W40 API CH4

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	colour	Natural
3	Kinematic Viscosity, cst @ 100’C	14-16
4	Viscosity Index, min.	135
6	TBN, mg. KOM/gm	10-12

ECO TECH MG 20W40 (API-CF4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	14-16
4	Viscosity Index, min.	110
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	7-11

TURBO LIFE 15W40 (API-CF4)

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	220
3	Kinematic Viscosity, cst @ 100’C	12-14
4	Viscosity Index, min.	120
5	Pour Point, ‘C, max.	-18
6	TBN, mg. KOM/gm	10-12

PREMIUM TURBO-LIFE 15W40 (API-CH4 )

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Colour	Natural
3	Kinematic viscosity, cSt @ 100’C	14-16
4	Viscosity Index,min	135
5	TBN, mg. KOM/gm	10-12

PREMIUM TURBO-X 15W40 (API-CI4)

CHARACTERSTICS		VALUE
1	Appearance	Bright & Clear
2	Colour	Natural
3	Kinematic viscosity, cSt @ 40’C	14-16
4	Viscosity Index,min	135
5	TBN, mg. KOM/gm	10-12

Request For MSDS

TECHNO-GRAPHITE GREASE

CHARACTERISTICS		VALUES
1	Appearance	Greyish Black & smooth
2	Resistance to Breakdown	Passes
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	300-320
4	Drop point, °C Min.	95’C
5	Cooper Corrosion strip, @75’C for 24hrs	Passes

TECHNO-HIGH TEMPERATURE GREASE HTX / HTX1000]

CHARACTERISTICS		HTX	HTX 1000
1	Appearance	smooth	smooth
2	Type of Soap	Organic Clay	Organic Clay
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	280-300	280-300
4	Drop point, °C Min.	265-295	265-295
5	Cooper Corrosion strip, @100’C for 24hrs	Negative	Negative

TECHNO WB-GREASE

CHARACTERISTICS		VALUES
1	Appearance	Greenish brown
2	Type of Soap	Sodium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	250-270
4	Drop point, °C Min.	180’C
5	Cooper Corrosion strip, @100’C for 24hrs	Negative
5	Water Wash out Test	Passes

TECHNO-CHASSIS GREASE

CHARACTERISTICS		VALUES
1	Appearance	Darkbrown smooth
2	Type of Soap	Calcium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	265 – 295
4	Drop point, °C Min.	110’C
5	Water Washout test	Passes
6	Leakage Tendency Test	Passes

TECHNO EP-SERIES GREASE (EP1/ EP2/ EP3)

CHARACTERISTICS		EP1	EP2	EP3
1	Appearance	Brownish smooth	Brownish smooth	Brownish smooth
2	Type of Soap	Lithium	Lithium	Lithium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	310 – 340	265 – 295	220 – 250
4	Drop point, °C Min.	180’C	180’C	180’C
5	Cooper Corrosion strip, @100’C for 24hrs	Negative	Negative	Negative
5	Difference between Worked and Unworked Penetration (Max)	20	20	20

TECHNO-EP SERIES GREASE (EP0/ EP00/ EP000)

CHARACTERISTICS		EP 0	EP 00	EP 000
1	Appearance	Yellowish Golden	Yellowish Golden	Yellowish Golden
2	Type of Soap	Lithium	Lithium	Lithium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	355 – 385	400 – 430	440 – 470
4	Drop point, °C Min.	175’C	165’C	160’C
5	Cooper Corrosion strip, @100’C for 24hrs	Negative	Negative	Negative

CALCY MP-3 GREASE GP3

CHARACTERISTICS		VALUE
1	Appearance	Light Yellow Smooth & Uniform
2	Type of Soap	Calcium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	220-250
4	Drop point, °C Min.	90
5	Cooper Corrossion @ RT/24HR	ASTM 1a

XTRAMILE APLR 35000 NLGI3

CHARACTERISTICS		VALUE
1	Appearance	Golden Yellowish
2	Type of Soap	Lithium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	232 – 238
4	Drop point, °C Min.	194’C
5	Cooper Corrossion @ RT/24HR	ASTM 1a

DYNAMIC AP-3 RED GEL GREASE NLGI 3

CHARACTERISTICS		VALUE
1	Appearance	Reddish Gel type
2	Type of Soap	Lithium
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	232 – 238
4	Drop point, °C Min.	194’C
5	Cooper Corrossion @ RT/24HR	ASTM 1a

DYNAMIC AP-3 GREASE NLGI3

CHARACTERISTICS		VALUE
1	Appearance	Light Yellow
2	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	220-250
3	Drop point, °C Min.	180
4	Soap Type Structure	Lithium Smooth & Buttery

TECHNO HONN

CHARACTERISTICS		VALUE
1	Colour	Red
2	Appearance	Bright & Clear
3	Flash Point, COC, ‘C, min.	128
4	Kinematic Viscosity at 40`C, cSt	2.0 – 7.5
5	Density @ 29.5`C, gm/cm3	0.80-0.84
6	Copper Corrosion @ 100`C for 3Hrs.	1

TECHNO GRIND NC-20

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Kinematic Viscosity at 40`C, cSt	32
3	Flash Point, COC, ‘C, min.	210
4	Pour point, COC, `C	-9
5	Foaming Test	Passes
6	Viscosity Index	100
7	Copper Strip Corrosion for 3hrs. at 100`C	1a

TECHNO ROCK- 100

CHARACTERISTICS		VALUE
1	Colour	Amber
2	Appearance	Bright & Clear
3	Flash Point, COC, ‘C, min.	230
4	Rust Test	Passes
5	Pour point, COC, `C	-6
6	Kinematic Viscosity at 40`C, cSt	100
7	Carbon residue, wt %	0.25

TECHNO-FREEZ 32/46/68

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	160	180	206
3	TAN Value, mgKOH/gm.	0.06	0.05	0.05
4	Pour point, COC, `C	-27	-27	-27
5	Kinematic Viscosity at 40`C, cSt	32	46	68
5	Floc Point, `C, (min.)	-48	-45	-42

TECHNO- WAYLUBE 100/220

SR. No.	CHARACTERISTICS	VALUE
		100	220
1	Appearance	Br & clear	Br & clear
2	Kinematic Viscosity, cst @ 40 deg C.	100	220
3	Viscosity Index	95	95
4	Flash Point, COC, ⁰C.	220	240
5	Pour Point, ⁰C.	-6	-6
6	Copper corrosion at 100 degC., for 3 hrs	1b	1b

TECHNO-PMO 46/68/100/150/220/320

CHARACTERISTICS		VALUE
		46	68	100	150	220	320
1	Flash Point, COC, ‘C, min.	210	216	220	230	240	242
2	Viscosity Index	95	95	95	95	95	93
3	Rust Prevention	Passes	Passes	Passes	Passes	Passes	Passes
4	Kinematic Viscosity at 40`C, cSt	40-48	62-74	90-110	135-165	198-242	288-352

TECHNO VACUUM OIL 40/150

CHARACTERISTICS		VALUE
		40	150
1	Flash Point, COC, ‘C, min.	230	240
2	Viscosity Index	95	95
3	Appearance	Bright & Clear
4	Kinematic Viscosity at 40`C, cSt	100	150
5	Pour Point, ‘C, max.	-6	-6
6	Vapour Pressure	1 x 10 -6	1 x 10 -6

TECHNO-RUSTCHECK DW 072

SR.NO	CHARACTERISTICS	VALUE
1	Appearance	Clear fluid
2	Salt spray, hrs.	72
3	Humidity cabinet, days	50
4	Flash point, degC.	40
5	Film thickness, micron	5- 6

TECHNO-RUSTCHECK 048

SR.NO	CHARACTERISTICS	RUST COAT 274
1	Kinematic Viscosity, CST at 40 degC.	38
2	Copper strip corrosion 3 hrs. @ 100 ⁰C.	1
3	Film thickness (micron)	8-10
4	Salt spray , hrs	48

TECHNO-NEEDLE 32/46/68/100

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Clear	Clear	Clear
2	Colour	Colourless	Colourless	Colourless
3	Flash Point, COC, ‘C, min.	190	190	190
4	Kinematic Viscosity, cst @ 40’C	30-32	44-48	62-70
5	Pour Point, ‘C, max.	-12	-12	-12

TECHNO-SPIN 12/15/22

CHARACTERISTICS		VALUE
		12	15	22
1	Flash Point, COC, ‘C, min.	168	176	182
2	Kinematic Viscosity, cst @ 40’C	9 – 11	14 – 61	20 – 24
3	Viscosity Index, min.	97	97	97
4	Pour Point, ‘C, max.	-15	-12	-12

TECHNO-CUT SS3

Sr.No	CHARACTERISTICS	VALUE
1	Appearance	Amber liquid
2	PH at 5% concentration in D/W	9.5
3	Cast iron corrosion test,	Passes
4	Flash point, coc	NA
5	Frothing test	Passes
6	5% emulsion in D/W	Translucent & stable emulsion

TECHNO-CUT S20-700

TYPICAL CHARATERISTICS
CHARACTERISTICS	VALUE
EmulsionStability:
20% in 700ppm	Milky white emulsion after 24hrs.
Frothing test in 200 ppm H/W	Passes
Ph value of 5% distilled water	9.4
CopperCorrosion,D130	1a
Cold Stability(IS:1115)	PASS
Corrosiontest (IP–125)20%in 700ppm water	0/0-0
FlashPoint,COC,⁰C.	150

TECHNO-CUT S5-400

TYPICAL CHARATERISTICS
CHARACTERISTICS	VALUE
Emulsion Stability:
5%in400ppm	Milky white emulsion after 24hrs
Frothing test in 200 ppm H/W	Passes
Ph value of 5% distilled water	9.4
Copper Corrosion,D130	1a
Cold Stability(IS:1115)	PASS
Corrosiontes t(IP–125)4% in 400ppm water	0/0-0
FlashPoint,COC,⁰C.	150

TECHNO-CUT ND4-12

SR.NO	CHARACTERISTICS	VALUE
1	Appearance	Bright & Clear
2	Kinematic Viscosity, cst, @ 40 ºC	12
3	Flash Point, COC, ºC min	170
6	Copper Corrosion at 100 ºC for 3hrs	4c

TECHNO-CUT N-945 HOBING

SR.NO	CHARACTERISTICS	VALUE
1	Appearance	Bright & Clear
2	Kinematic Viscosity, cst, @ 40 ºC	30
3	Flash Point, COC, ºC	190
4	Pour Point, ºC	-6
5	Saponification Value, mg KOH/gm	18
6	Copper Corrosion at 100 ºC for 3	4c

TECHNO-CUT N-334 BROACHING

SR.NO	CHARACTERISTICS	VALUE
1	Appearance	Natural
2	Kinematic Viscosity, cst at 40 degC.	12
3	Flash point, degC.	160
4	Copper corrosion at 100 degC., for 1hours.	4c
5	Saponification Value, mg KOH/gm.	16

TECHNO-CUT N-20

SR.NO	CHARACTERISTICS	VALUE
1	Appearance	Clear liquid
2	Kinematic Viscosity, cst @ 40 C	20
3	Flash Point, ⁰C., COC	174
4	SAP value, mgKOH/gm	14
5	Copper corrosion at 100 ⁰C. for 3 hrs.	1b

TECHNO-COM 220

SR.NO	CHARACTERISTICS	VALUE
1	ISO VG GRADE	150 200
2	Kinematic Viscosity, cst @ 40 C	150 200
3	Viscosity Index	95 95
4	Flash Point,COCC.,min	240 250
5	TAN value, mgKOH/gm	0.6 0.6
6	Rust Test	PASSES

TECHNO-COM 150

SR.NO	CHARACTERISTICS	VALUE
1	ISO VG GRADE	150 200
2	Kinematic Viscosity, cst @ 40 C	150 200
3	Viscosity Index	95 95
4	Flash Point,COCC.,min	240 250
5	TAN value, mgKOH/gm	0.6 0.6
6	Rust Test	PASSES

TECHNO QUENCH 39/42

SR.NO	Parameters	39	42
1	Kin.Viscosityincst@40degC	30	30
2	ViscosityIndex,min.	95	95
3	FlashPoint(COC),degC,min	200	200
4	PourpointdegC,max	-6	-6
5	CopperCorrosion3hrs@100degC,max	1	1

TECHNO THERM 600

CHARACTERSTICS		VALUE
1	Kin.Viscosity,cst@40⁰C	30
2	Kin.Viscosity,cst@100 ⁰C.	5.4
3	ViscosityIndex	102
4	FlashPoint,degC.(COC),min	220
5	PourPoint,⁰C,max	-6

TECHNO THERM 500

CHARACTERSTICS		VALUE
1	Kin.Viscosity,cst@40⁰C	30
2	Kin.Viscosity,cst@100 ⁰C.	5
3	ViscosityIndex	98
4	FlashPoint,degC.(COC),min	216
5	PourPoint,⁰C,max	-6
6	Copper corrosion at 100 degC, for 3 hrs.	1 a

TECHNO MACH-RUN 100

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460
1	Appearance	Bright & Golden
2	Flash Point,(COC), C, min.	195	205	208	222	232	240	244	268
3	Kinematic viscosity, cSt @ 40’C	29-36	40-48	62-74	92-110	145-155	210-230	310-330	440-480
4	Viscosity Index,min	95	95	95	95	93	93	93	92
5	Gravity, API	0.860 TO 0.910

TECHNO HYDRO-TECH 10W

CHARACTERSTICS		VALUE
		10w
1	Colour	L1.0
2	Flash Point, COC, ‘C, min	210
3	Kinematic Viscosity, cst @ 100’C	6.6
4	Viscosity Index, min.	127
4	Pour Point, ‘C, max.	-24

TECHNO HYDRO-TECH TH

CHARACTERSTICS		VALUE
	ISO VG GRADE	46	68
1	Appearance	Bright & Clear
2	Colour, ASTM	L 0.5	0.5
3	Kinematic Viscosity, cst @ 40’C	46	68
4	Viscosity Index, min	124	124
5	Pour Point, ‘C, max	-12	-6
6	Rust Prevention Test	Pass	Pass

TECHNO HYDRO-TECH HVI

CHARACTERSTICS		VALUE
	ISO VG GRADE	15	32	46	68
1	Appearance	Bright & Clear
2	Flash Point, COC, ‘C, min.	110	200	205	210
3	Kinematic Viscosity, cst @ 40’C	15	32	46	68
4	Viscosity Index, min	124	124	124	124
5	Pour Point, ‘C, max	-6	-6	-6	-6
6	Rust Prevention Test	Pass	Pass	Pass	Pass

TECHNO HYDRO-TECH HLP

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100
1	Flash Point, COC, ‘C, min	200	210	220	230
2	Kinematic viscosity, cSt @ 40C, Min.	30-36	40-48	62-47	90-110
3	Viscosity Index,min	105	100	100	100
4	TAN, mgKOH/gm, max	1.5	1.5	1.5	1.5
5	RUST Prevention Test	PASS	PASS	PASS	PASS

TECHNO HYDRO-TECH AW

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460
1	Appearance	Bright & Clear
2	Flash Point,(COC), C, min.	200	210	218	230	234	242	242	254
3	Kinematic viscosity, cSt @ 40’C	30-36	40-48	62-47	90-110	135-165	198-242	288-352	414-506
4	Viscosity Index,min	95	95	95	95	95	95	95	95
5	Pour Point,’c,max	-6	-6	-6	-6	-6	0	0	0
6	RUST TEST	PASS
7	COPPER CORROSION	1	1	1	1	1	1	1	1
8	API,GRAVITY	0.860 TO 0.910

TECHNO HYDRO-MAX AW

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460
1	Appearance	WATER WHITE
2	Flash Point,(COC), C, min.	200	210	218	230	234	242	242	254
3	Kinematic viscosity, cSt @ 40’C	30-36	40-48	62-47	90-110	135-165	198-242	288-352	414-506
4	Viscosity Index,min	95	95	95	95	95	95	95	95
5	Pour Point,’c,max	-6	-6	-6	-6	-6	0	0	0
6	RUST TEST	PASS
7	COPPER CORROSION	1	1	1	1	1	1	1	1
8	API,GRAVITY	0.860 TO 0.910

TECHNO HYDRO RUN

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460
1	Appearance	Bright & Golden
3	Flash Point, C, (COC), Min.	200	210	218	230	234	242	242	254
5	Kinematic Viscosity, cst @40’C	30-36	40-48	62-74	90-110	153-165	198-242	288-352	414-506
4	Viscosity Index,min	95	95	95	95	95	95	95	95
6	Pour Point, ‘C, max.	-3	-3	-3	-3	-3	0	0	0

TECHNO GEAR-TECH EP(API-GL 4)

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460	680
1	Appearance	Bright & Clear
2	Kinematic Viscosity, cst 40`C,Min	30-36	40-48	62-74	90-110	153-165	198-242	288-352	414-506	612-748
3	Flash Point, C, (COC), Min.	198	208	220	225	235	240	245	255	265
4	Viscosity Index	95	95	95	95	95	95	95	95	95
5	Pour Point	-6	-6	-6	-6	-6	-6	-6	-6	-6
6	Rust Prevention Test	Passes
7	COPPER CORROSION	1	1	1	1	1	1	1	1	1
8	API GRAVITY	0.860 TO 0.910

TECHNO GEAR-MAX EP (API GL 4)

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460	680
1	Appearance	Bright & Clear
2	Kinematic Viscosity,cst40`C,Min	30-36	40-48	62-74	90-110	153-165	198-242	288-352	414-506	612-748
3	Flash Point, C, (COC), Min.	198	208	220	225	235	240	245	255	265
4	Viscosity Index	95	95	95	95	95	95	95	95	95
5	Pour Point	-6	-6	-6	-6	-6	-6	-6	-6	-6
6	Rust Prevention Test	Passes
7	COPPER CORROSION	1	1	1	1	1	1	1	1	1
8	API GRAVITY	0.860 TO 0.910

TECHNO GEAR-RUN EP (API GL 4)

CHARACTERSTICS		VALUE
	ISO VG GRADE	32	46	68	100	150	220	320	460	680
1	Appearance	Bright & Clear
2	Kinematic Viscosity, cst @40c,Min	30-36	40-48	62-74	90-110	153-165	198-242	288-352	414-506	612-748
3	Flash Point, `C, (COC), Min.	198	208	216	225	235	240	245	255	265
4	Viscosity Index	95	95	95	95	95	95	95	95	95
5	Rust Prevention Test	Passes

Request For MSDS

Services

PLANT SURVEYS: Help determine exact lubricant requirements. Identifies opportunities for lubricant consolidation. Helps maximize equipment performance & service life.

LUBRICATION MAINTAINCE SOFTWARE: Tracks lubrication and maintenance schedules. Based on a complete survey of the plant and machinery. Creates a maintenance history.

LUBRICANT SPECIFICATION MACHINERY TAGS: Color coded- Ensures that the proper lubricant is used. Helps prevent lubricant misapplication. Provided for each piece of equipment.

TRAINING PROGRAMS/ TECH SUPPORT: Tailored to fit your needs by expert lubrication engineers.

Values

HEALTH & SAFETY: We conduct our business with high regard and respect for the health and safety of our employees, contractors, business associates and neighbouring communities. We Judiciously and continuously strive to raise the bar, guided by our stringent health and safety performance standards.

ENVIRONMENTAL RESPOSIBILITY: We are committed to minimizing environmental impacts by reducing wastes, emissions, and other releases. We understand that it is a privilege to conduct our business in the communities where we operate and their right to live in healthy environment is respected.

CORPORATE RESPOSIBILITY: We are committed to promoting sustainable social and economic benefits to the communities wherever we operate.

HONESTY & RESPECT: We uphold high standards of business ethics and integrity, enforce strict principles of corporate governance, and support transparency in all our operations. One of our greatest assets is our reputation for acting ethically in the interests of employees, shareholders, customers, business partners, and the communities where we operate.

CONTINUOUS IMPROVEMENT: Innovation and high performance are our way of life. Our culture creates a fulfilling environment which enables employees to reach their full potential. We believe a positive attitude towards constructive change is possible.

Vision

To be a major diversified Lubricant Company capable of providing complete solution to customer requirements and strive to be their choice through commitment to our principles and values.

Mission

To achieve excellence in all aspects of business with focus on customer delight.

To attain market leadership by developing, adopting and assimilating state of the art technology for competitive advantage.

To cultivate high standards of business ethics and quality standards in all our actions for a strong corporate identity and brand equity

To help and preserve ecological balance by being conscious of environmental requirements.<

Our Company

We avail this valuable opportunity to introduce ourselves as one of the accredited manufactures of Automotive, Industrial & Speciality oil under our registered brand name “TECHOL”.

We are an established Company with manufacturing and blending unit with a well established quality management system for our lubricant production. We are into this business from almost 2 decades. We started this business in a small way but with dedication, sincerity & quality persistence. We have been able to achieve all the goals as set by the company.

Our Directors have an ideology of maintaining quality & customer satisfaction. Our moto is to Provide customers with best quality products at a reasonable price, because “QUALITY IS OUR STRENGTH” & our strategy revolves around that.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

st

Related posts

Passenger Oil

Hydraculic

Diesel