Textile Oil

TECHNO SPIN 12/15/22

TECHNO SPIN 12/15/22 oils are low viscosity lubricants manufactured from highly refined base stocks possessing excellent chemical oxidation stability and further fortified with carefully selected oxidation and rust inhibitors, anti-wear and anti-foam agents..

Applications

Suitable for high speed spindles in textile machineries operating at very high speeds and other machine tools where high speed and moderate loads are encountered.
Recommended for lubrication of textile and machine tools, spindle bearings, timing gears, centrifugal separators, positive displacement blowers and hydraulic system of certain high precision machine tools.

Benefits

Good strength of oil film.
Good demulsibility.
High chemical stability.
Lowest fluid friction.
Resistance to rusting and corrosion.

PERFORMANCE LEVEL:Meets IS 493 PART II (Re-Affirmed 2004)

PACK SIZE: 26L, 50L, 210L

TECHNO-NEEDLE 32/46/68/100

Request for MSDS
PDS

TECHNO-NEEDLE 32/46/68/100 oils tailored out of deep refined based stocks and further fortified with the additives to perform effectively. These lubricants provide proper lubrication to the stitching machines. Due to the right incorporation of rust and foam inhibitor, tool life of the machine increases which ultimately results in increased production.
.

Applications

This is recommended for use in all kinds of stitching machines in textile industries. .

Benefits

Excellent lubrication to the tools in function.
Very good rust & foam resistor.
Proper quenching of the tools under prolonged use.
Stain free performance.
Increases machine life.

PACK SIZE: 26L, 50L, 210L

CHARACTERISTICS		VALUE
		100	150	220	320
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	210	210	210	210
3	Kinematic Viscosity, cst @ 100’C	92-108	142-158	220-230	305-335
4	Viscosity Index, min.	90	90	90	90
5	Pour Point, ‘C, max.	-3	-3	0	0
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5	1.5

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

CHARACTERISTICS		VALUE
		32	46	68
1	Appearance	Bright & Golden
2	Flash Point, COC, ‘C, min.	185	190	200
3	Kinematic Viscosity, cst @ 100’C	26-35	42-50	65-70
4	Viscosity Index, min.	90	90	90
5	Pour Point, ‘C, max.	-6	-6	-6
6	Neutralization Nos. (mg KOH/g-ma)	1.5	1.5	1.5

CHARACTERISTICS		VALUE
1	Appearance	Bright & Red
2	Flash Point, COC, ‘C, min.	190
3	Kinematic Viscosity, cst @ 100’C	6-8
4	Viscosity Index, min.	150
5	Pour Point, ‘C, max.	-38

CHARACTERISTICS		VALUE
1	Appearance	Bright & Clear
2	Colour	Natural
3	Kinematic viscosity, cSt @ 100’C	14-16
4	Viscosity Index,min	135
5	TBN, mg. KOM/gm	10-12

CHARACTERSTICS		VALUE
1	Appearance	Bright & Clear
2	Colour	Natural
3	Kinematic viscosity, cSt @ 40’C	14-16
4	Viscosity Index,min	135
5	TBN, mg. KOM/gm	10-12

CHARACTERISTICS		VALUES
1	Appearance	Greyish Black & smooth
2	Resistance to Breakdown	Passes
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	300-320
4	Drop point, °C Min.	95’C
5	Cooper Corrosion strip, @75’C for 24hrs	Passes

CHARACTERISTICS		HTX	HTX 1000
1	Appearance	smooth	smooth
2	Type of Soap	Organic Clay	Organic Clay
3	Consistency of worked grease, @ 25±0.5°C, 0.1 mm units (60 double strokes)	280-300	280-300
4	Drop point, °C Min.	265-295	265-295
5	Cooper Corrosion strip, @100’C for 24hrs	Negative	Negative